Klfy
/r/Acadiana
2011.06.27 15:45 rapcat /r/Acadiana
2015.01.07 20:29 thegreatscup The hottest reporters, anchors, journalists, sportscasters and forecasters
2023.06.02 00:35 pudakak Anybody else get a unique pressing error besides the EP?
 | I don’t think there was supposed to be a green LP in this set. It matches the Avey side drawing pretty well though. submitted by pudakak to AnimalCollective [link] [comments] |
2023.05.17 17:12 Allons_a_Lafayette RE: QR code "scam" in downtown Lafayette parking lot
 | This makes no sense. Local news is adorable. submitted by Allons_a_Lafayette to Acadiana [link] [comments] I have so many questions. A few: Did the scammer order $788 worth of merchandise from Walmart and have it delivered to the victim? Why didn't the news team ask the owner of the parking lot about this? Was there a surveillance camera showing the scammers placing the fake QR code on the sign? Was there even a fake QR code on the sign? www.klfy.com/local/lafayette-parish/woman-receives-788-walmart-charge-after-scanning-qr-code-in-downtown-lafayette-parking-lot/ Woman receives $788 Walmart charge after scanning QR code in downtown Lafayette parking lot by: Dawson Damico Posted: May 16, 2023 LAFAYETTE, La. (KLFY) – A woman claims to have received a charge from Walmart after scanning a QR code to pay for parking in downtown Lafayette. Martha Gale’s daughter, Kinly, came to the parking lot in downtown Lafayette near the intersection of Buchanan Street and Garfield Street to park her car and enjoy an event in Parc Lafayette. She got out her car and walked to a QR code sign to pay. Everything seemed okay until the next morning when she got a large delivery from Walmart that she never bought. “I see a boat load of merchandise from Walmart, then I checked the app on the cell phone, and it was a purchase for $788 which I did not purchase,” said Gale. With no other reason for this to happen, Gale believes her credit card information was stolen after her daughter scanned the code on the sign in the parking lot. “I absolutely think we were scammed,” she said. “That was the last purchase that occurred at the pay lot and then the Sunday morning receiving these products at the door.” News 10 spoke with the president of Better Business Bureau, Chris Babin, who said this is a scam the organization is familiar with. “Scammers are trying to use those codes (to) lure consumers into going to websites, submitting payment information and giving their payment information away to scammers,” Babin said. Babin believes a scammer may have created a QR Code that goes to a website that mirrors one where you would potentially pay for parking or makes it look legitimate. “You scan the QR code thinking you are paying to park, but you are submitting payment information on a scam website that’s going to a scammer providing them with your card information,” Babin said. Babin advised if you pay to park, make sure the lot requires payment using a QR code. He also advises people to take an extra minute to look at the website you are sent to before entering your payment information. https://preview.redd.it/bly97qin6n0b1.png?width=748&format=png&auto=webp&s=9e77ecf8f02eaff08fce0f5414e87a60ed9060c5 https://preview.redd.it/cvrikhyhnm0b1.png?width=598&format=png&auto=webp&s=8453ed85ae0d7fd10a04f90988a91af61de8575c EDIT Here's an update: https://preview.redd.it/ixz19iye6n0b1.png?width=634&format=png&auto=webp&s=043712755532e5a80d6d4b753e9f8638fa02214b |
2023.05.13 14:07 SouthernHiker1 Curious about where Libertarians would side on this issue
https://www.klfy.com/louisiana/louisiana-restaurant-owner-forced-to-close-down-business-after-drag-brunch/
2023.05.02 17:37 shawn19 The Rich Juice makes healthy choices taste as good as they feel - KLFY
 | submitted by shawn19 to Health2020 [link] [comments] |
2023.04.23 15:30 truthlafayette KLFY INVESTIGATES: Arrested Lafayette police officer faced prior disciplinary action
 | submitted by truthlafayette to Acadiana [link] [comments] |
2023.04.22 12:41 MugShots Lake Charles middle school student arrested for carrying a dangerous weapon - KLFY
 | submitted by MugShots to ArrestStories [link] [comments] |
2023.04.16 11:44 MugShots Opelousas man arrested after robbing bank then returning money and waiting for police - KLFY
 | submitted by MugShots to ArrestStories [link] [comments] |
2023.03.27 19:53 Remarkable-Stress920 Grailed account help
2023.03.26 01:37 BASSmittens420 Project sc10 build help!
Here is one of my current projects a team associated sc10. I have a new standard size servo I grabbed for 1/10 which I hope is correct although it seems like it will be tight! Can anyone help point me in the right direction for the correct servo mount that works on this model? If you also have any insight for a set of turnbuckles since these aren’t exactly straight 100% anymore that would be awesome too. Thanks for any help fellow rc’ers!
I think this may be the part, discontinued obviously but theyre on ebay. https://www.ebay.com/itm/175443435077?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=9ejF4WCoQYC&sssrc=2047675&ssuid=JBzHMMvmTeC&widget_ver=artemis&media=COPY If anyone can confirm or if theres any upgraded versions that are compatible I'd be open to that as I'm guessing pricing would be similar
I also seem to be missing the little pivot ball that the end of the servo arm would attach to in this sort of setup. Does the type of servo arm become affected or do i just get a normal servo arm and attach the correct size pivot ball? edit: https://www.towerhobbies.com/product/ballstud-long-neck-5mm-10/ASC31283.html?gclid=Cj0KCQjwt_qgBhDFARIsABcDjOdKLFyBLg7jj8sAOd2AOOYG1R3g72fyCbyWwVxSIUKMGO9a2WgZq6oaAuBFEALw_wcB So I think if i find the correct length servo arm I can grab a set of these and should be okay. Hopefully i can get some insight before spending a bunch more on something I'm not totally certain about
2023.03.20 01:19 EnvidiaProductions I am once again asking for your help with my Noise Plethora
 | So I'm been troubleshooting this thing for almost two weeks now. I've been able to narrow it down to "the problem is in between these two things", but I think that I simply lack the experience and know-how to dig deeper. I've been going back and forth with Befaco about it, but I'm only getting one reply every three days or so and it's not always the most helpful answer. submitted by EnvidiaProductions to synthdiy [link] [comments] First of all, here is the schematic: https://www.befaco.org/docs/Noise_Plethora/Noise_Plethora_V1_THT_sch.pdf Here is the assembly manual with diagrams at the bottom for IC names and component locations from the schematic: https://www.befaco.org/docs/Noise_Pleth ... Manual.pdf Now that we've gotten that out of the way, my problem is simply that I get no sound from Generator B. Generator A works perfectly and so does the bottom noise generator. YES, the Teensy board pins are positioned correctly. Alright, time to pull the schematic out. I've tested the Befaco THT SGTL5000 codec with my scope and it is outputting Generator B's signal. So it's alive at that point. I've also tested "CON2" and that also is carrying the signal. The problem arises when it enters the filter. When testing IC3_CEM3320 I'm seeing no signal. That makes me believe that there is something wrong with the filter. (?) I've tested the 2u2 cap and the 24k at the beginning of the filter and both seem good. I have the signal here (DAC B): https://preview.redd.it/hmldv01ldsoa1.png?width=885&format=png&auto=webp&s=2f6d9bfe97ac4908478951eeafe4b97e37d9821b This is where I lose the signal: https://preview.redd.it/7ka7mkjcdsoa1.png?width=2646&format=png&auto=webp&s=9b9c60eeff875a425f075ce260690112484c1cd5 Is there something between these two points that I am missing? Or does my problem lie in the filter circuit? How can I narrow it down further? When putting the module in test mode (hold the bank encoder button for a while until both banks turn to the #8) to send square waves from the generator, I can see the wave on Generator A's CEM3320. On Generator B, I just get a steady voltage when testing the pins. No waveforms at all. I've tried swapping Generator A and Generator B's 3320s, but I get the same results so I don't think the chip is bad. I'm a bit confused as to what pin I should be using for ground when testing the chip because it looks like there are multiple ground pins. Is it situational or do I choose one of the ground pins and roll with that? Here are some pictures of the build uploaded to Imgur to avoid Reddit compression, thank you for any advice/tips you can provide! https://imgur.com/a/DX1ccfh |
2023.03.12 22:05 MachFreeman trying to figure out what the local and federal restrictions mean for me and if i’m authorized to takeoff and land at my current location. max altitude? the flight controllers at the air base weren’t very helpful in understanding the restrictions
 | submitted by MachFreeman to drones [link] [comments] |
2023.02.03 02:25 codym4 Came across this fools live the other day. What a damn mess. But is this news article about peaches? https://www.klfy.com/local/lafayette-parish/man-allegedly-scamming-people-in-lafayette-via-social-media-app-tik-tok/amp/
 | submitted by codym4 to OMGTERRENCEBABES2 [link] [comments] |
2023.01.27 19:58 ThiccSlab1063 Sylvia Masters (in green KLFY)
 | submitted by ThiccSlab1063 to hot_reporters [link] [comments] |
2023.01.10 13:28 DoodooMan9000 Caddo Commissioner Arrested on Felony Warrant
You may also remember Steven Jackson from several years ago claiming he was the victim of a hate crime (haha nope)
https://www.klfy.com/louisiana/shreveport-mayoral-candidate-says-he-was-threatened-with-lynching/
2023.01.10 12:51 finnagains Louisiana: Man Shot Dead Breaking Into A Home Armed With A Shovel and Lug Wrench - 51-year-old Robert Rheams had just carjacked someone - Recently Released After 20 Years in Prison For Armed Robbery (KLFY) 9 Jan 2023
 | submitted by finnagains to HarpiesBizarre [link] [comments] |
2023.01.10 12:50 finnagains Louisiana: Man Shot Dead Breaking Into A Home Armed With A Shovel and Lug Wrench - 51-year-old Robert Rheams had just carjacked someone - Recently Released After 20 Years in Prison For Armed Robbery (KLFY) 9 Jan 2023
| | submitted by finnagains to ConspiracyPics [link] [comments] |
2023.01.10 12:49 finnagains Louisiana: Man Shot Dead Breaking Into A Home Armed With A Shovel and Lug Wrench - 51-year-old Robert Rheams had just carjacked someone - Recently Released After 20 Years in Prison For Armed Robbery (KLFY) 9 Jan 2023
| | submitted by finnagains to AnythingGoesPictures [link] [comments] |
2023.01.10 12:49 finnagains Louisiana: Man Shot Dead Breaking Into A Home Armed With A Shovel and Lug Wrench - 51-year-old Robert Rheams had just carjacked someone - Recently Released After 20 Years in Prison For Armed Robbery (KLFY) 9 Jan 2023
| | submitted by finnagains to Anythinggoesphoto [link] [comments] |
2023.01.10 12:47 finnagains Louisiana: Man Shot Dead Breaking Into A Home Armed With A Shovel and Lug Wrench - 51-year-old Robert Rheams had just carjacked someone - Recently Released After 20 Years in Prison For Armed Robbery (KLFY) 9 Jan 2023
| | submitted by finnagains to Newspic [link] [comments] |
2023.01.09 14:51 Proud_Definition8240 sylvia masters ( klfy)
 | submitted by Proud_Definition8240 to NewsAnchorTributes [link] [comments] |
2023.01.09 14:04 ThiccSlab1063 sylvia masters ( klfy)
| | submitted by ThiccSlab1063 to hot_reporters [link] [comments] |
2023.01.06 20:50 bluelotus214 Louisiana man charged with rape